311C Series Single video signal through CAT5 Cabling

Features

• Pair of 1 x BNC to Terminal Block
• 300M On board impedance coupling
• device On board noise filter Use CAT5 cable

311C Series Single video signal through CAT5 Cabling

Features

• Pair of 1 x BNC to Terminal Block
• 300M On board impedance coupling
• device On board noise filter Use CAT5 cable

ST211C single video, Audio and Power signal transmission up to 100M

Specifications

• Video : Frequency response: DC-6Mhz Common-mode/Differential-mode Rejection: 15khz –6Mhz 60dB type 60dB type
• UTP Port : RJ45
• Dimensions(mm) : 43*20*2.1

• Features 4 BNC male to 1 RJ45 or 8 Pin terminal block
• Transmit video signal via UTP Lan cable
• Passive, no power required
• Maximum 300m color video working distance (much better than coaxial cable 100m)
• Built in impedance couple device and noise filter for exceptional interference immunity
• Can be used as a receiver and as transmitter
• High quality video balun, full motion color video or black and white
• Fast and easy installation

Output 1: One RJ45, each for 4 channels
(pin 1-2 ch1, pin 4-5 ch2, pin 3-6 ch3, pin 7-8 ch4)
Output 2: Four pairs of screw output for 4 channels

• 4 Channel Passive Video Transceiver
• Convert 4 Video Inputs to Screw Terminal Block, for use with CAT5 Cable
• 60 dB crosstalk and noise immunity
• Outstanding interference rejection
• Quality color and B&W video signals up to 400m's

• 8 Channel Passive Video Transceiver
• Convert 8 Video Inputs to Screw Terminal Block, for use with CAT5 Cable
• 60 dB crosstalk and noise immunity
• Outstanding interference rejection
• Quality color and B&W video signals up to 400m's

• 8 Channel Passive Video Transceiver
• Convert 8 Video Inputs to 2 x RG45 Sockets
• 60 dB crosstalk and noise immunity
• Outstanding interference rejection
• Quality color and B&W video signals up to 400m's